Colección de Ciencias de los Materiales

Título

Colección de Ciencias de los Materiales

Elementos en la colección

Estudio del desempeño tecnológico de empresas alfareras venezolanas 2014
El presente documento tiene por objeto:
a) Estudiar aspectos endógenos de los retos y dificultades que enfrentan las alfarerías industriales venezolanas.
b) Identificar sus fortalezas y relacionarlas con su desempeño en términos de…

 Arenas movedizas<br /><br />
Presentacion realizada en la USB en 2012 sobre tipos de arenas movedizas, composicion, funcionamiento, casos de estudio incluyendo ensayos de caracterizacion sobre una arena movediza del Mont Saint Michel (Francia).

Aporte academico a la emision cultural "efecto mariposa" en Radio Uruguay, 23 diciembre 2013

Formation of hollow vitreous and semi-crystalline microspheres in slag flame spraying
Slags may be flame sprayed to produce hollow vitreous or semi-crystalline microspheres.
Feedstock compositions, as well as the heating and cooling kinetics, determine the properties
of the final product. These kinetics were estimated by finite…

RELEVANCIA DEL FACTOR “MATERIA PRIMA” EN UN PROCESO CERAMICO INDUSTRIAL: UN CASO DE ESTUDIO VENEZOLANO
Frente a los problemas de calidad experimentados en producción por muchas empresas cerámicas venezolanas, una de las respuestas consiste en realizar, en los diversos sectores de las minas proveedoras, un análisis no solamente de…

Colour matching in decorative thermally sprayed glass coatings
Coloured coatings were obtained on steel by plasma spraying without severe in-flight alteration of pigments, taking profit of the low thermal conductivity of the glassy matrix of glaze particles. Colour matching was studied by mixing 3 different…

Cavitation-erosion of 3Y-TZPs obtained at different sintering<br /><br />
temperatures
The cavitation-erosion resistance of tetragonal zirconia polycrystals with 3 mol% Y2O3 (3Y-TZPs) has been studied in specimens sintered in the temperature range from 1500 to 1590 ºC. The study presents mass loss measurements after exposure to…

Particles Spreading Phenomena in the Case of Glass Thermal Spraying
The spreading phenomena of particles during thermal spraying are quite difficult to observe given the kinetics of the process. In this work, the splat formation of glass and alumina is theoretically compared, showing that glass transition and…

Optimización de la preparación de barbotina en plantas de baldosas
Cuando el objetivo de una empresa cerámica es alcanzar una mayor producción, sin invertir en nuevos equipos, su principal preocupación es la optimización del rendimiento de producción de la maquinaria disponible. En…

SMOOTHING IRON OXIDE-BASED GLASS PARTICLES  WITH AN OXYACETYLENIC FLAME
Milled particles from a (SiO2-CaO-Fe2O3) glass were smoothed by flame spraying, focusing on the elimination of superficial roughness or angularity without reaching complete fusion of the glass. The purpose of this study is the further application to…
Ver todos los 27 elementos